NAME dtlogin - CDE login service SYNOPSIS dtlogin [ -config configuration_file ] [ -daemon ] [ -debug debug_level ] [ -error error_log_file ] [ -nodaemon ] [ -resources resource_file ] [ -server server_entry ] [ -session session_program ] DESCRIPTION Key Supported Tasks The dtlogin client supports the following key tasks: - Launch of dtgreet login screen for explicitly managed local and remote displays and XDMCP managed remote displays. - Access to traditional terminal (character) login from GUI login screen. - System dependent user authentication and login. - Launching the selected session. The dtlogin client provides services similar to those pro- vided by init(1M), getty(1M) and login(1) on character ter- minals: prompting for login and password, authenticating the user, and running a ``session.'' A ``session'' is defined by the lifetime of a particular process; in the traditional character-based terminal world, it is the user's login shell process. In the DT context, it is the DT Session Manager. If the DT Session Manager is not used, the typical substi- tute is either a window manager with an exit option, or a terminal emulator running a shell, where the lifetime of the terminal emulator is the lifetime of the shell process that it is running; thus reducing the X session to an emulation of the character-based terminal session. When the session is terminated, dtlogin resets the X server and (optionally) restarts the whole process. The dtlogin client supports management of remote displays using the X Display Manager Control Protocol, Version 1.0. (XDMCP). When dtlogin receives an Indirect query via XDMCP, it can run a chooser process to perform an XDMCP BroadcastQuery (or an XDMCP Query to specified hosts) on behalf of the display and offer a menu of possible hosts that offer XDMCP display management. This feature is useful with X terminals that do not offer a host menu themselves. Because dtlogin provides the first interface that users see, it is designed to be simple to use and easy to customize to the needs of a particular site. Login Window The Login window allows to user to enter a user ID and pass- word, select a startup session, and select a startup locale. User may also reset the X server or temporarily suspend the X server to access the command line login prompt. Contents of Login window: user name field Entry field to enter user ID. password field Entry field to enter user password (no-echo). OK Authenticate user and launches session. Start Over Clear login and password field. Options Display menu for locale, session, command line login, and reset login screen. Help Display help message. Login Window - Options Menu Allows user to select locale name and login session type. Also allows user to restart the X server or switch to a character login prompt (for local displays). Contents of Options Menu: Language Show Language menu. Session Show Session menu. Command Line Login Display character login prompt (local displays only). Enabled when dtlogin was started by sytem at boot time (see dtconfig man page). Disabled if dtlogin was manualy started (possibly for some configuration test) from a command line "root" login ses- sion for security reasons (would place user in a running "root" session). Reset Login Screen Restart X Server and return to login screen. Login Window - Session Menu Allows user to select which desktop session should be started upon login. Contents of Sessions Menu: Common Desktop Environment Start a CDE desktop session (Xsession) OpenWindows Desktop Start an OpenWindows desktop (Xsession.ow) User's Last Desktop Start desktop of type user ran on his previ- ous login Fail-safe Session Start a fail-safe session (Xfailsafe) Login Window - Language Menu Selecting the language from the login screen Options menu immediately localizes the login screen and sets LANG for the next session. Login screen localization and LANG return to the default value upon conclusion of the session if the language resource is specified. If the language resource is not specified the language specified in this option is used on this display until it is changed again. The contents of this menu can vary depending upon the locales installed on the system and can be overridden by using the languageList resource. The system or languageList locales specified are displayed as menu items in the Language menu. Alternate text to be displayed may be specified for a given locale name by using the languageName resource. Controlling The Server The dtlogin client controls local servers using POSIX sig- nals. SIGHUP is expected to reset the server, closing all client connections and performing other clean-up duties. SIGTERM is expected to terminate the server. If these sig- nals do not perform the expected actions, the resources resetSignal and termSignal can specify alternate signals. To control remote servers not using XDMCP, dtlogin searches the window hierarchy on the display and uses the KillClient X protocol request in an attempt to clean up the terminal for the next session. This may not actually kill all of the clients, since only those that have created windows are noticed. XDMCP provides a more sure mechanism; when dtlogin closes its initial connection, the session is over and the terminal is required to close all other connections. Controlling Dtlogin The dtlogin client responds to two signals: SIGHUP and SIGTERM. When sent a SIGHUP, dtlogin rereads the configura- tion file and the file specified by the servers resource and determines whether entries have been added or removed. If a new entry has been added, dtlogin starts a session on the associated display. Entries that have been removed are dis- abled immediately, meaning that any session in progress is terminated without notice, and no new session is started. When sent a SIGTERM, dtlogin terminates all sessions in pro- gress and exits. This can be used when shutting down the system. Internationalization All labels and messages are localizable. The message catalog dtlogin.cat contains the localized representations of the default labels and messages. The dtlogin client reads the appropriate message catalog indicated by the LANG environ- ment variable and displays the localized strings. An option on the authentication screen allows the user to override the default language for the subsequent session. If the authen- tication screen has been localized for the selected language, it is redisplayed in that language; otherwise, it is displayed in the default language. In either case, the LANG environment variable is set appropriately for the resulting session. The resource language is available in the dtlogin configura- tion file to change the default language for a display. The resource languageList is available in the dtlogin configura- tion file to override the default set of languages displayed on the authentication screen. The resource languageName is available to provide a mapping from locale names to the text displayed on the Language menu. Authentication And Auditing The dtlogin client performs traditional local UNIX login and auditing. Additional authentication or auditing function such as Kerberos or B1 may be added by individual vendors. X Server Security The X server provides both user-based and host-based access control. By default, dtlogin uses user-based access control to the X server (MIT-MAGIC-COOKIE-1). This level of security allows access control on a per-user basis. It is based on a scheme where if a client passes authorization data which is the same as the server has, it is allowed access. When a user logs in, this authorization data is by default stored and protected in the $HOME/.Xauthority file. However, using host-based access control mechanisms may be preferable in environments with unsecure networks as user- based access control allows any host to connect, given that it has discovered the private key. Another drawback to user-based access control is that R2 or R3 clients will be unable to connect to the server. The authorize resource controls whether user-based or host- based access control is used by dtlogin. See also the Xserver, Xsecurity, xhost, and xauth man pages for more information. OPTIONS All options, except -config, specify values that can also be specified in the configuration file as resources. Typically, customization is done via the configuration file rather than command line options. The options are most useful for debug- ging and one-shot tests. -config configuration_file Specifies a resource file that specifies the remain- ing configuration parameters. This replaces the dtlogin default Xconfig file. See the Xconfig sec- tion for more information. -daemon Specifies ``true'' as the value for the daemonMode resource. This makes dtlogin close all file descrip- tors, disassociate the controlling terminal and put itself in the background when it first starts up (just like the host of other daemons). -debug debug_level Specifies the numeric value for the debugLevel resource. A non-zero value causes dtlogin to print debugging statements to the terminal; it also dis- ables the daemonMode resource, forcing dtlogin to run synchronously. -error error_log_file Specifies the value for the errorLogFile resource. See the Xerrors section for more information. -nodaemon Specifies ``false'' as the value for the resource. -resources resource_file Specifies the value for the resources resource. See the Xresources section for more information. -server server_entry Specifies the value for the servers resource. See the Xservers section for more information. -udpPort port_number Specifies the value for the requestPort resource. This sets the port-number that dtlogin monitors for XDMCP requests. Since XDMCP uses the registered well-known udp port 177, this resource should prob- ably not be changed except for debugging. -session session_program Specifies the value for the session resource. See the Xsession section for more information. RETURN VALUE Exit values are: 0 Successful completion. >0 Error condition occurred. RESOURCES The dtlogin client is controlled via the contents of the dtlogin configuration file, the default being /usr/dt/config/Xconfig. Some resources control the behavior of dtlogin in general, some can be specified for a particu- lar display. GENERAL RESOURCES The dtlogin general resources are not display-specific and apply to all displays where appropriate. Name Class Value Type Default ______________________________________________________________________________________________ accessFile AccessFile String NULL authDir AuthDir String /var/dt autoRescan AutoRescan Boolean True daemonMode DaemonMode Boolean False debugLevel DebugLevel Int 0 errorLogFile ErrorLogFile String NULL errorLogSize ErrorLogSize Int 50 exportList ExportList String NULL fontPathHead FontPathHead String NULL fontPathTail FontPathTail String NULL keyFile KeyFile String /usr/dt/config/Xkeys lockPidFile LockPidFile Boolean True networkDevice NetworkDevice String /dev/dtremote pidFile PidFile String NULL removeDomainname RemoveDomainname Boolean True requestPort RequestPort Int 177 servers Servers String :0 Local local /system_dependent_path/X :0 sysParmsFile SysParmsFile String /system_dependent_path timeZone TimeZone String NULL wakeupInterval WakeupInterval Int 15 accessFile To prevent unauthorized XDMCP service and to allow forward- ing of XDMCP IndirectQuery requests, this file contains a database of hostnames which are either allowed direct access to this machine, or have a list of hosts to which queries should be forwarded to. The format of this file is described in the Xaccess section. If not set, all hosts will be allowed XDMCP service. authDir This is a directory name that dtlogin uses to temporarily store authorization files for displays using XDMCP. autoRescan This boolean controls whether dtlogin rescans the configura- tion file and server file after a session terminates and the files have changed. You can force dtlogin to reread these files by sending a SIGHUP to the main process. daemonMode The dtlogin client can make itself into an unassociated dae- mon process. This is accomplished by forking and leaving the parent process to exit, then closing file descriptors and releasing the controlling terminal. This is inconvenient when attempting to debug dtlogin. Setting this resource to "false" disables daemonMode. If dtlogin is started from /etc/inittab, it should not be run in daemon mode. Otherwise the init process will think it has terminated and will attempt to restart it. debugLevel A non-zero value specified for this integer resource enables debugging information to be printed. It also disables daemon mode, which redirects the information into the bit-bucket. dtlogin, which is not normally useful. errorLogFile Error output is normally directed at the system console. To redirect it, set this resource to any file name. This file contains any output directed to stderr by Xsetup, Xstartup and Xreset. errorLogSize This resource specifies the maximum size of the error log file in kilobytes. When the limit is reached dtlogin will delete the oldest entries in the file until the file size is reduced to 75% of the maximum. exportList This resource can contain a set of variable names separated by a space or tab. Each variable named is obtained from the dtlogin environment and loaded into the environment of the server and session. See the Environment section for details. fontPathHead This resource value is prepended to the default X server font path. fontPathTail This resource value is appended to the default X server font path. keyFile XDM-AUTHENTICATION-1 style XDMCP authentication requires that a private key be shared between dtlogin and the termi- nal. This resource specifies the file containing those values. Each entry in the file consists of a display name and the shared key. By default, dtlogin does not include support for XDM-AUTHENTICATION-1 because it requires DES, which is not generally distributable. lockPidFile This resource controls whether dtlogin uses file locking to prevent multiple instances of dtlogin from executing con- currently. networkDevice For remote connections, the value for 'line' in /etc/utmp must also exist as a device in the /dev directory for com- mands such as finger to operate properly. This resource specifies the pathname of the /dev file dtlogin will create when a remote display connects. For most platforms, the file will be created as a symbolic link to /dev/null. The speci- fied value must start with "/dev/", otherwise the value is discarded and no file is created. pidFile The filename specified is created to contain an ASCII representation of the process-ID of the main dtlogin pro- cess. This can be used when seding signals to dtlogin. The dtlogin client also uses file locking to attempt to prevent more than one dtlogin from running on the same machine. See the lockPidFile resource for more information. removeDomainname When computing the display name for XDMCP clients, dtlogin typically creates a fully qualified host name for the termi- nal. As this is sometimes confusing, dtlogin removes the domain name portion of the host name if it is the same as the domain name for the local host when this variable is set. requestPort This indicates the UDP port number that dtlogin uses to listen for incoming XDMCP requests. Unless you need to debug the system, leave this with its default value. servers This resource either specifies a file name full of server entries, one per line (if the value starts with a slash), or a single server entry. Each entry indicates a display that should constantly be managed and that is not using XDMCP. The general syntax for each entry is: DisplayName DisplayClass DisplayType[@ite] [Command [options]] A typical entry for local display number 0 is: :0 Local local@console /usr/openwin/bin/X :0 DisplayName The display name must be something that can be passed in the -display option to any X program. This string is used in the display-specific resources to specify the particular display, so be careful to match the names (e.g., use ":0 local /usr/openwin/bin/X :0" instead of "localhost:0 local /usr/openwin/bin/X :0" if your other resources are specified as "Dtlogin._0.session"). A `*' in this field will be expanded to "<hostname>:0" by dtlogin. DisplayClass The display class portion is also used in the display-specific resources as the class portion of the resource. This is useful if you have a large collection of similar displays (a group of X terminals, for example) and want to set resources for groups of them. When using XDMCP, the display is required to specify the display class, so perhaps your X terminal documentation describes a reasonably standard display class string for your device. DisplayType A DisplayType of "local" indicates that an X server should be started for this entry. A value of "foreign" indicates to attach to an existing X server. A value of "local_uid" indicates that an Xserver should be started for this entry under a specific user id. A user name such as "root" must follow in next field. In followin exam- ple, by placing "root" here, Xserver starts under the user id of "root". On Sun system's this will give Xserver the ability to raise interactive scheduling priority of a client with mouse/keyboard focus to increase perfor- mance of the application. :0 Local local_uid@console root /usr/openwin/bin/Xsun :0 In limited situations, the Xserver should not be run under a "root" id for security reasons. Examples are usually specific to Xserver exten- sions. On Sun Xservers one example involves the Display Postscript extension. If the DPS extension is granted access (via Xserver option line) to read and write Unix files via the "- dpsfileops" option (see Xsun man page) it should not be run under a "root" user id. For increaseced security, could instead run it as the "nobody" user. :0 Local local_uid@console nobody /usr/openwin/bin/Xsun :0 -dpsfileops @ite On local bitmaps, the user may choose a "Com- mand Line Login" option via the login screen, which temporarily suspends the X-server and presents the traditional character "login:" prompt. The user can then log in and perform non-X related tasks. When the user finishes and logs out, the X-server is restarted, and the login screen is redisplayed. In order to support "Command Line Login" mode, the display must have an associated Internal Terminal Emu- lator (ITE) device. By default, dtlogin associates the ITE device "console" (/dev/console) with display ":0". If your configuration does not match this default, specify "@<device>" for the display(s) with an associ- ated ITE and "@none for all other displays listed in the servers file. Command [options] This is the string used to start the X server. The dtlogin client will always connect to the X server using the DisplayName specified, so you might need to specify an explicit connection number as an option to your X server (:0 in the above example). sysParmsFile This resource specifies a file containing shell commands, one of which sets the timezone environment variable (TZ) for the system. If the timezone is set via the shell syntax, "TZ=", dtlogin can use this information to set the timezone for the user session. timeZone This resource specifies the local time zone for dtlogin. It is loaded into the environment of dtlogin as the value of the variable TZ and inherited by all subsequent sessions. Some systems maintain a configuration file that contains the timezone setting (ex. /etc/src.sh). See the sysParmsFile resource. wakeupInterval If the user selects "Command Line Login" mode from the login screen, dtlogin terminates the X-server and allows the trad- itional character-based login prompt, "login:" to become visible. If the user does not log in within 2 * wakeupInter- val seconds, the X-server is restarted. Once the user has logged in, dtlogin checks every wakeupInterval seconds to see if the user has logged out. If so, the X-server is res- tarted and the login screen is redisplayed. DISPLAY RESOURCES The dtlogin client display resources can be specified for all displays or for a particular display. To specify a par- ticular display, the display name is inserted into the resource name between ``Dtlogin'' and the final resource name segment. For example, Dtlogin.expo_0.startup is the name of the resource defining the startup shell file on the ``expo:0'' display. The resource manager separates the name of the resource from its value with colons, and separates resource name parts with dots, so dtlogin uses underscores for the dots and colons when generating the resource name. Resources can also be specified for a class of displays by inserting the class name instead of a display name. A display that is not managed by XDMCP can have its class affiliation specified in the file referenced by the servers resource. A display using XDMCP supplies its class affilia- tion as part of the XDMCP packet. Name Class Value Type Default _____________________________________________________________________ authorize Authorize Boolean False authName AuthName String MIT-MAGIC-COOKIE-1 authFile AuthFile String NULL chooser Chooser cpp Cpp String system dep. environment Environment String system dep. failsafeClient FailsafeClient String /system_dep./xterm grabServer GrabServer Boolean True grabTimeout GrabTimeout Int 3 seconds language Language String system dep. languageList LanguageList String NULL languageName LanguageName String NULL openDelay OpenDelay Int 5 seconds openRepeat OpenRepeat Int 5 seconds openTimeout OpenTimeout Int 30 seconds pingInterval PingInterval Int 5 minutes pingTimeout PingTimeout Int 5 minutes reset Reset String NULL resetForAuth ResetForAuth Boolean False resetSignal Signal Int 1 SIGHUP resources Resource String NULL session Session String /usr/dt/bin/Xsession setup Setup String NULL startAttempts StartAttempts Int 4 startup Startup String NULL systemPath SystemPath String system_dep._path systemShell SystemShell String /bin/sh terminateServer TerminateServer Boolean True termSignal Signal Int 15 (SIGTERM) userAuthDir UserAuthDir String /var/dt/tmp userPath UserPath String system_dep._path xdmMode XdmMode Boolean False xrdb Xrdb String /system_dep./xrdb authorize Authorize is a boolean resource that controls whether dtlo- gin generates and uses authorization for the server connec- tions. (See authName.) authName If authorize is used, authName specifies the type of author- ization to be used. Currently, dtlogin supports only MIT- MAGIC-COOKIE-1 authorization, XDM-AUTHORIZATION-1 could be supported, but DES is not generally distributable. XDMCP connections state which authorization types are supported dynamically, so authName is ignored in this case. (See authorize.) authFile This file is used to communicate the authorization data from dtlogin to the server, using the -auth server command line option. It should be kept in a write- protected directory to prevent its erasure, which would disable the authorization mechanism in the server. If NULL, dtlogin will generate a file name. chooser Specifies the program run to offer a host menu for indirect queries redirected to the special host name CHOOSER. /usr/dt/bin/dtchooser is the default. See the Xaccess sec- tion. cpp This specifies the path of the C preprocessor that is used by xrdb. environment This resource can contain a set of <name>=<value> pairs separated by a space or tab. Each item is loaded into the environment of the server and session. See the Environment section for details. failsafeClient If the default session fails to execute, dtlogin falls back to this program. This program is executed with no arguments, but executes using the same environment variables as the session would have had. (See The Xfailsafe File.) grabServer See grabTimeout. grabTimeout To improve security, dtlogin grabs the server and keyboard while reading the name and password. The grabServer resource specifies if the server should be held while the name and password is read. When FALSE, the server is ungrabbed after the keyboard grab succeeds; otherwise, the server is grabbed until just before the session begins. The grabTimeout resource specifies the maximum time dtlogin will wait for the grab to succeed. The grab may fail if some other client has the server grabbed, or possibly if the network latencies are very high. The grabTimeout resource has a default of 3 seconds; be cautious when using this resource, since a user can be deceived by a look-alike window on the display. If the grab fails, dtlogin kills and restarts the server (if possible) and session. Some X-terminals cannot display their login screens while the server is grabbed. Setting grabServer to false will allow the screen to be displayed, but opens the possibility that a user's login name can be stolen by copying the con- tents of the login screen. Since the keyboard is still grabbed and the password is not echoed, the password cannot be stolen. language This resource specifies the default setting for the LANG environment variable. If the dtlogin screen is localized for that language, it is displayed appropriately; otherwise, it is displayed in the language "C". The user may tem- porarily override this setting via an option on the login screen. When the subsequent session terminates, the LANG variable reverts to this setting. languageList This resource allows the user to override the default set of languages displayed in the "Language" menu of the login screen. It is useful if the set of languages actually used on a particular display is smaller than the set installed on the system. The resource value is a list of valid values for the LANG environment variable. Language values should be separated by one or more spaces or tabs. languageName This resource allows the user to override the default locale name displayed in the "Language" menu of the login screen with alternate text. This way, instead of users seeing a "En_US" item, they could see a "English (United States)" item instead. This resource is specified as "Dtlogin *<locale name>. languageName: text" as follows: Dtlogin*En_US.languageName: English (United States) Dtlogin*Fr_CA.languageName: French (Canadian) openDelay See startAttempts openRepeat See startAttempts openTimeout See startAttempts pingInterval See pingTimeout pingTimeout To discover when remote displays disappear, dtlogin occa- sionally "pings" them, using an X connection and sending XSync requests. The pingInterval resource specifies the time (in minutes) between successive ping attempts, and pingTimeout specifies the maximum wait time (in minutes) for the terminal to respond to the request. If the terminal does not respond, the session is terminated. The dtlogin client does not ping local displays. Although it may seem harmless, it is undesirable when a local session is terminated as a result of the server waiting (for remote filesystem service, for example) and not responding to the ping. reset This specifies a program that is run (as root) after the session terminates. If not set, no program is run. The con- ventional name is Xreset. See The Xreset File. resetForAuth The original implementation of authorization in the sample server reread the authorization file at server reset time, instead of when checking the initial connection. Since dtlogin generates the authorization information just before connecting to the display, an old server does not get current authorization information. This resource causes dtlogin to send SIGHUP to the server after setting up the file, causing an additional server reset to occur, during which time the new authorization information is read. resetSignal This resource specifies the signal dtlogin sends to reset the server. See the section Controlling The Server resources This resource specifies the name of the file to be loaded by xrdb (1) as the resource data-base onto the root window of screen 0 of the display. This resource data base is loaded just before the authentication procedure is started, so it can control the appearance of the "login" window. See the section on the authentication screen, which describes the various resources that are appropriate to place in this file. There is no default value for this resource, but the conventional name is Xresources. See the Resource section. session This specifies the session to be executed for the authenti- cated user. By default, the /usr/dt/bin/Xsession file is run. The conventional name is Xsession. See The Xsession File. setup This specifies a program that is run (as root) prior to the display of the authentication screen. By default, no program is run. The conventional name for a file used here is Xsetup. See the Xsetup section. startAttempts Four numeric resources control the behavior of dtlogin when attempting to open reluctant servers: openDelay, openRepeat, openTimeout, and startAttempts. openDelay is the duration (in seconds) between successive attempts; it is also the amount of time that dtlogin waits for a SIGUSR1 signal to be sent by the Xserver; openRepeat is the number of attempts to make; openTimeout is the amount of time to wait while actu- ally attempting the opening (i.e., the maximum time spent in the connect (2) syscall); and startAttempts is the number of times the entire process occurs before giving up on the server. After openRepeat attempts have been made, or if openTimeout seconds elapse in any particular attempt, dtlo- gin terminates and restarts the server, attempting to con- nect again. This process is repeated startAttempts time, at which point the display is declared dead and disabled. (See openDelay, openRepeat, and openTimeout.) startup This specifies a program that is run (as root) after the authentication process succeeds. By default, no program is run. The conventional name for a file used here is Xstartup. See the Xstartup section. systemPath The dtlogin client sets the PATH environment variable for the startup and reset scripts to the value of this resource. Note the conspicuous absence of "." from this entry. This is a good practice to follow for root; it avoids many system penetration schemes. systemShell The dtlogin client sets the SHELL environment variable for the startup and reset scripts to the value of this resource. terminateServer This boolean resource specifies whether the X server should be terminated when a session terminates (instead of reset- ting it). This option can be used if the server tends to grow without bound over time in order to limit the amount of time the server is run continuously. termSignal This resource specifies the signal dtlogin sends to ter- minate the server. See the section Controlling The Server userAuthDir When dtlogin cannot write to the usual user authorization file ( $HOME/.Xauthority), it creates a unique file name in this directory and points the environment variable XAUTHOR- ITY at the created file. userPath The dtlogin client sets the PATH environment variable for the session to this value. It should be a colon-separated list of directories; see sh(1) for a full description. xdmMode If True, the $HOME/.xsession file will be executed from Xsession upon user authentication, rather than dtsession. xrdb Specifies the program used to load the resources. The authentication screen reads a name-password pair from the keyboard. As this is a Motif toolkit client, colors, fonts and some layout options can be controlled with resources. General resources for this screen should be put into the file named by the dtlogin resources resource, the default being Xresources. Language specific values such as text or fonts should be specified in the Dtlogin app-defaults file. Logo Resources Name Class Value Type Default ______________________________________________________________ bitmapFile BitmapFile String NULL background Background Pixel #a8a8a8 topShadowPixmap TopShadowPixmap String 25_foreground The default logo on the authentication screen may be replaced with a bitmap or pixmap of the user's choice. The resources should be prefaced with the string Dtlogin*logo* when specified. bitmapFile Specifies the absolute path name to the bitmap or pixmap file to be used for the logo. background Specifies the background color for the logo. topShadowPixmap Specifies the pixmap to use for the logo border shadow. Alternate Desktop Session Resources These resources allow adding additional desktops to the Login Managers option sessions menu. Resource names and specific values used to enable the Sun OpenWindow's desktop (as shipped with Sun's CDE) follow. Name Class Value Type Example Value ____________________________________________________________________________ altDtsIncrement AltDtsIncrement String True altDtName AltDtName String OpenWindows Desktop altDtKey AltDtKey String /usr/openwin/bin/olwm altDtStart AltDtStart String /usr/dt/config/Xsession.ow altDtLogo AltDtLogo String OWlogo The file containing the above values will be found in /usr/dt/config/C/Xresources.d/Xresources.ow. They cause the OpenWindow desktop to be added to the option sessions menu. Additional files may be added in this Xresources.d directory to allow additional X based desktops to appear on the Login Manager's sessions menu. (or a file may be placed in /etc/dt/config/C/Xresources.d) for a workstation specific addition. Same resource names would be used. The presence of the altDtsIncrement resource in these files causes an incre- mented count number to be appended to the resources. So actual values of above resouce example after they are read into system might actuall be ... altDtName2, altDtKey2, altDtStart2, altDtLog2. Next desktop added would then be ... altDtName3, altDtKey3, altDtStart3, altDtlog3, etc. The syntax for setting the following resources is Dtlogin*altDt...<n> where <n> is some number such as altDtName1, altDtName2, etc. The number's are either added implicitly, such as the above Xresources.d example, useful for "package added" desktops. Or the numbers can be expli- citly added to resources if used directly in the Xresources file to facilitate ordering of the desktops on the sessions menu. altDtName<n> Specifies the name of the alternate desktop. This name will appear both on the sessions menu and also on the Login's greet window when the associated desktop is selected as the login destination. altDtKey<n> Specifies a key file, one that if such a file is present, the alternate desktop is added to the option session menu of the Login Manager. By con- vention, the file is often the desktop's window manager. But it can actualy be any file uniquely associated with the alternate desktop. altDtStart<n> Specifies the script that starts the alternate desk- top altDtLogo<n> Base name of the alternate desktop's icon logo. Either in XPM (color) or XBM (monochrome) format. This logo will display on the Login greet window when the associated desktop is selected as the login destination. Greeting Resources The following resources describe the greeting string used on the login screen. The resources should be prefaced with the string Dtlogin*greeting* when specified. Name Class Value Type Default ____________________________________________________________________________________________________________________ foreground Foreground Pixel black background Background Pixel dynamic fontList FontList FontList -*-*schoolbook-medium-i-normal--18-* alignment Alignment String ALIGNMENT_CENTER labelString LabelString String Welcome to %LocalHost% persLabelString LabelString String Welcome %s foreground Specifies the foreground color for the welcome message. background Specifies the background color for the welcome message. The default is light-gray for color systems or white for monochrome systems. fontList Specifies the font to use for the welcome mes- sage. labelString Specifies the string to use for the welcome message. Multiple lines can be specified by including newline characters (\n) in the text. If the token %LocalHost" is included in the text, it will be replaced with the name of the host providing login service. If the token %DisplayName% is included in the text, it will be replaced with the display name. persLabelString Specifies the string to use for the personal- ized welcome message. This is the message displayed after the use name has been entered. The %s will be replaced with the user name entered. alignment Specifies the string to use for the alignment of the Welcome message. Valid values are ALIGNMENT_BEGINNING, ALIGNMENT_CENTER and ALIGNMENT_END. Matte Resources The following resources describe the matte layout used on the login screen. The resources should be prefaced with the string Dtlogin*matte. when specified. Name Class Value Type Default _________________________________________________________ width Width Int 806 for Highres displays 755 for Mediumres displays 585 for lowres displays height Height Int 412 for Highres displays 385 for Mediumres displays 300 for Lowres displays width Specifies the width to use for the login_matte. height Specifies the height to use for the login_matte. The following resources describe the fonts layout used on the login screen. The resources should be prefaced with the string Dtlogin*. when specified. Label Resources Name Class Value Type Default ________________________________________________________________________________________________________ labelFont LabelFont String -*-swiss 742-bold-r-normal-*-140-*-p-100-* for lowres displays -*-swiss 742-medium-r-normal-*-140-*-p-110-* for high res displays. textFont TextFont String -*-prestige-medium-r-normal-*-128-72-* for highres diqsplays. -*-helvetica-bold-r-normal-*-100-* for lowres displays labelFont Specifies the labelFont to use for the pushBut- tons and labels. textFont Specifies the textFont to use for the pushBut- tons and labels. ENVIRONMENT The dtlogin client invokes the user's session with the fol- lowing default environment: DISPLAY is set to the associated display name EDITOR is set to /usr/dt/bin/dtpad HOME is set to the home directory of the user KBD_LANG is set to the value of LANG for applicable languages LANG is set to the current NLS language (if any) LC_ALL is set to the current NLS language (if any) LC_MESSAGES is set to the current NLS language (if any) LOGNAME is set to the user name MAIL is set to /usr/mail/$USER (system dependent) PATH is set to the value of the userPath resource USER is set to the user name SHELL is set to the user's default shell (from /etc/passwd) TERM is set to dtterm TZ is set to the value of the timeZone resource or system default XAUTHORITY may be set to an authority file Adding to the Environment List Four methods are available to modify or add to this list depending on the desired scope of the resulting environment variable. The exportList resource is available to allow the export of variables provided to the dtlogin process by its parent. Variables specified by this method are available to both the display's X server process and the user's session and over- ride any default settings. The resource accepts a string of <name> separated by at least one space or tab. The environment resource is available in the dtlogin confi- guration file to allow setting of environment variables on a global or per-display basis. Variables specified by this method are available to both the display's X server process and the user's session and override any default settings. The resource accepts a string of <name>=<value> pairs separated by at least one space or tab. The values specified must be constants because no shell is used to parse the string. See the Resources section for details on setting this resource. For example: Dtlogin*environment:MAIL_HOST=blanco MAIL_SERVER=pablo Note: The environment variables LANG and TZ have their own dedicated resources in the configuration file and should not be set via environment. Environment variables that require processing by a shell or are dependent on the value of another environment variable can be specified in the startup script Xsession. These vari- ables are loaded into the environment of all users on the display, but not to the X server process. They override any previous settings of the same variable. The Xsession script accepts ksh syntax for setting environment variables. For example: MAIL=/usr/mail/$USER Finally, personal environment variables can be set on a per-user basis in the script file $HOME/.dtprofile. The dtlogin client accepts either sh, ksh, or csh syntax for the commands in this file. The commands should only be those that set environment variables, not any that perform termi- nal I/O, excepting tset(1) or stty(1). If the first line of .dtprofile is #!/bin/sh, #!/bin/ksh, or #!/bin/csh, dtlogin uses the appropriate shell to parse .dtprofile. Otherwise, the user's default shell ($SHELL) is used. FILES The dtlogin client is designed to operate in a wide variety of environments and provides a suite of configuration files that can be changed to suit a particular system. The default dtlogin configuration files can be found in /usr/dt/config with the exception of Xsession which is stored in /usr/dt/bin. They are listed below: Xconfig specifies other dtlogin configuration files and dtlogin behavior Xaccess used by dtlogin to control access from displays requesting XDMCP service Xservers contains the list of displays to for dtlogin to explicitly manage Xresources contains resource definitions specifying the appearance of the login screen Xsetup a script executed as `root' prior to display of the login screen Xstartup a script executed as `root' after user has successfully authenticated Xsession a script executed as the authenticated `user' that starts the user's session Xfailsafe a script executed as the authenticated `user' that starts a failsafe session Xreset a script executed as `root' after the user's session has exited The Xconfig File The Xconfig file contains the general resources for dtlogin and is the top of the dtlogin configuration file tree. Xcon- fig specifies the location of other dtlogin configuration and log files and specifies dtlogin behavior. The location of other dtlogin configuration and log files are specified by resource definitions. The defaults are listed below: Dtlogin.errorLogFile: /var/dt/Xerrors Dtlogin.pidFile: /var/dt/Xpid Dtlogin.accessFile: Xaccess Dtlogin.servers: Xservers Dtlogin*resources: %L/Xresources Dtlogin*setup: Xsetup Dtlogin*startup: Xstartup Dtlogin*reset: Xreset Dtlogin*failsafeClient Xfailsafe Dtlogin*session /usr/dt/bin/Xsession If the path specified for accessFile, servers, resources, setup, startup, reset, failsafeClient, or session is rela- tive, dtlogin will first look for the file in directory /etc/dt/config, then /usr/dt/config. Note that some of the resources are specified with ``*'' separating the components. These resources can be made unique for each different display, by replacing the ``*'' with the display-name. See the DISPLAY RESOURCES section for a complete discussion. The default Xconfig file is /usr/dt/config/Xconfig. A sys- tem administrator can customize Xconfig by copying /usr/dt/config/Xconfig to /etc/dt/config/Xconfig and modify- ing /etc/dt/config/Xconfig. The default Xconfig file contains the configuration and log file entries shown above as well as a few vendor specific resource definitions and examples. See the GENERAL RESOURCES and DISPLAY RESOURCES sections for the complete list of resources that can be defined in Xconfig. The Xaccess File The database file specified by the accessFile resource pro- vides information which dtlogin uses to control access from displays requesting XDMCP service. This file contains three types of entries: entries which control the response to Direct and Broadcast queries, entries which control the response to Indirect queries, and macro definitions. The format of a Direct entry is either a host name or a pat- tern. A pattern is distinguished from a host name by the inclusion of one or more meta characters (`*' matches any sequence of 0 or more characters, and `?' matches any sin- gle character) which are compared against the host name of the display device. If the entry is a host name, all com- parisons are done using network addresses, so any name which converts to the correct network address may be used. For patterns, only canonical host names are used in the com- parison, so ensure that you do not attempt to match aliases. Preceding either a host name or a pattern with a `!' char- acter causes hosts which match that entry to be excluded. An Indirect entry also contains a host name or pattern, but follows it with a list of host names or macros to which indirect queries should be sent. Indirect entries may also specify to have dtlogin run dtchooser to offer a menu of hosts to which a login screen can be displayed. A macro definition contains a macro name and a list of host names and other macros that the macro expands to. To dis- tinguish macros from hostnames, macro names start with a `%' character. Macros may be nested. When checking access for a particular display host, each entry is scanned in turn and the first matching entry deter- mines the response. Direct and Broadcast entries are ignored when scanning for an Indirect entry and vice-versa. Blank lines are ignored, `#' is treated as a comment delim- iter causing the rest of that line to be ignored, and `\new- line' causes the newline to be ignored, allowing indirect host lists to span multiple lines. Here is an example Xaccess file: DJB # # Xaccess - XDMCP access control file # # # Direct/Broadcast query entries # !xtra.lcs.mit.edu # disallow direct/broadcast service for xtra bambi.ogi.edu # allow access from this particular display *.lcs.mit.edu # allow access from any display in LCS # # Indirect query entries # #define %HOSTS macro %HOSTS expo.lcs.mit.edu xenon.lcs.mit.edu \ excess.lcs.mit.edu kanga.lcs.mit.edu #force extract to contact xenon extract.lcs.mit.edu xenon.lcs.mit.edu #disallow indirect access by xtra !xtra.lcs.mit.edu dummy #all others get to choose among %HOSTS *.lcs.mit.edu %HOSTS If XDMCP access is granted, a temporary file may be created in the directory specified by authDir which contains author- ization information for the X-terminal. It is deleted when the session starts. For X terminals that do not offer a host menu for use with Broadcast or Indirect queries, the chooser program can do this for them. In the Xaccess file, specify ``CHOOSER'' as the first entry in the Indirect host list. Chooser will send a Query request to each of the remaining host names in the list and offer a menu of all the hosts that respond. The list may consist of the word ``BROADCAST,'' in which case chooser will send a Broadcast instead, again offering a menu of all hosts that respond. Note that on some operating systems, UDP packets cannot be broadcast, so this feature will not work. Example Xaccess file using chooser: #offer a menu of these hosts to extract extract.lcs.mit.edu CHOOSER %HOSTS #offer a menu of all hosts to xtra xtra.lcs.mit.edu CHOOSER BROADCAST The program to use for chooser is specified by the chooser resource. Resources for this program can be put into the file named by resources. The default Xaccess file is /usr/dt/config/Xaccess. A sys- tem administrator can customize Xaccess by copying /usr/dt/config/Xaccess to /etc/dt/config/Xaccess and modify- ing /etc/dt/config/Xaccess. The default Xaccess file contains no entries. The Xservers File Contains the list of displays to manage. See the servers resource description under GENERAL RESOURCES for more infor- mation. The default Xservers file is /usr/dt/config/Xservers. A system administrator can customize Xservers by copying /usr/dt/config/Xservers to /etc/dt/config/Xservers and modi- fying /etc/dt/config/Xservers. The default Xservers file contains an entry for one local display. The Xresources File Contains the resource definitions specifying the appearance of the login screen. See the dtgreet specification for more information. The default Xresources file is /usr/dt/config/Xresources. A system administrator can customize Xresources by copying /usr/dt/config/Xresources to /etc/dt/config/Xresources and modifying /etc/dt/config/Xresources. The Xsetup File This file is typically a shell script. It is run as "root" and should be very careful about security. This script is run before the login screen is displayed. No arguments of any kind are passed to the script. Dtlogin waits until this script exits before displaying the login screen. The default Xsetup file is /usr/dt/config/Xsetup. A system administrator can customize Xsetup by copying /usr/dt/config/Xsetup to /etc/dt/config/Xsetup and modifying /etc/dt/config/Xsetup. The default Xsetup file contains vendor specific code but typically contains code that sets up the X server prior to the display of the login screen, such as setting up keyboard maps. The Xstartup File This file is typically a shell script. It is run as "root" and should be very careful about security. This is the place to put commands that display the message of the day or do other system-level functions on behalf of the user. Various environment variables are set for the use of this script: DISPLAY set to the associated display name HOME set to the home directory of the user PATH set to the value of the systemPath resource USER set to the user name SHELL set to the value of the systemShell resource No arguments of any kind are passed to the script. Dtlogin waits until this script exits before starting the user ses- sion. If the exit value of this script is non-zero, dtlogin discontinues the session immediately and starts another authentication cycle. The default Xstartup file is /usr/dt/config/Xstartup. A system administrator can customize Xstartup by copying /usr/dt/config/Xstartup to /etc/dt/config/Xstartup and modi- fying /etc/dt/config/Xstartup. The default Xstartup file contains code to change ownership of /dev/console to the user whose session is running on the console. The Xsession File This script initializes a user's session and invokes the desktop session manager. It is run with the permissions of the authorized user, and has several environment variables pre-set. See the Environment section for a list of the pre- set variables. The default Xsession file is /usr/dt/bin/Xsession. A system administrator can customize Xsession by copying /usr/dt/bin/Xsession to /etc/dt/config/Xsession and modify- ing /etc/dt/config/Xsession. The session resource defined in Xconfig must also be changed to reference the customized Xsession file. See the Xconfig section for information on how to update the Xconfig file. The default Xsession file contains session initialization code. It does contain some vendor specific code but its gen- eral function is as follows: - Sources the user's $HOME/.dtprofile - Sources any /etc/dt/config/Xsession.d/* scripts - Sources any /usr/dt/config/Xsession.d/* scripts - Launches in the background the desktop welcome client, dthello - Sources the application search path setup script, dtsearchpath - Launches in the background the help setup client, dthelpgen - Launches in the background the application manager directory setup client, dtappgather - Execs the desktop session manager, dtsession System administrators are discouraged from customizing the Xsession file. The Xreset File Symmetrical with Xstartup, this script is run after the user session has terminated. Run as root, it should probably con- tain commands that undo the effects of commands in Xstartup, such as unmounting directories from file servers. The col- lection of environment variables that were passed to Xstartup are also given to Xreset. The default Xreset file is /usr/dt/config/Xreset. A system administrator can customize Xreset by copying /usr/dt/config/Xreset to /etc/dt/config/Xreset and modifying /etc/dt/config/Xreset. The default Xreset file contains code change ownership of /dev/console back to root. STATUS FILES The Xerrors File Contains error messages from dtlogin and anything output to stderr by Xsetup, Xstartup or Xreset. The system adminis- trator can use the contents of this file for dtlogin troub- leshooting. The errorLogSize resource limits the size of the Xerrors file and can prevent it from growing without bound. A system administrator can change the pathname of the Xer- rors file by setting the errorLogFile resource in the Xcon- fig file. See the Xconfig section for information on how to update the Xconfig file. The Xpid File Contains the process ID of the master dtlogin process which can be used when sending signals to dtlogin. A system administrator can change the pathname of the Xpid file by setting the pidFile resource in the Xconfig file. See the Xconfig section for information on how to update the Xconfig file. ERROR MESSAGES - Login incorrect; please try again. - Unable to change to home directory. - Sorry. Maximum number of users already logged in. - Login error, invalid user ID. - Login error, invalid group ID. - Login error, invalid audit ID. - Login error, invalid audit flag. - Logins are currently disabled. - Your current password has expired.
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |